| (For use with Philips 9400i, 9350, and 9450) |
 Do not connect the recorder to the cradle or USB cable at this time!
|
1. Go to www.emdat.com/ software/Philips.asp, and click on the link titled Download and Install Emdat InSync Runtime Components for the Philips recorders.
|
2. On the File Download window, click Run.
|
3. Once the download is complete, a confirmation window may appear depending on your computer's security settings. Click Run.
If you do not see this window, proceed to the next step.
|
4. Click Yes.
|
5. Allow the program to fully install.
Once the installation is complete, click OK.
|
6. Insert the USB Cable into your computer's USB port.
|
7. Make sure that the recorder is turned on, and that the Hold switch on the right side of the recorder is disengaged.
Connect the smaller end of the USB cable to the bottom of the recorder. Once you connect the recorder, the driver for the recorder will install automatically.
|
|
8. Disconnect the recorder from the USB cable.
|
|
You have successfully completed Step 1.
|
1. Go to www.emdat.com/software/ and click on the InSync link on the left side of the screen.
Click on Version 4.9.360.
|
2. On the File Download window, click Run.
|
3. InSync will start downloading. The amount of time this will take depends on your internet connection speed, and may take several minutes.
|
4. Once the download is complete, a confirmation window may appear depending on your computer's security settings. Click Run.
If you do not see this window, proceed to the next step.
|
5. Click Yes. If you receive any warnings from your anti-virus program, select the option to allow the installation to continue.
|
6. The Emdat InSync installer window will appear.
Click Next.
|
7. Select the installation destination here. We recommend that you keep it to the default location.
Click Next.
|
8. On the Confirmation window, Click Next.
InSync will now install.
|
9. Allow the program to fully install. Once installation is complete, click Close.
|
|
You have successfully completed Step 2.
|
|
Do not connect the recorder to the cradle or USB cable at this time!
|
1. Click on the Start menu and select All Programs. Locate the Emdat folder, and click on Emdat InSync.
|
2. Enter the Client Name and Client Password provided to you by your transcription company.
|
3. At the top of the window, click on the Recorder/Audio Source tab. Check the box next to Philips 9450/9400i/9350.
|
4. A window will pop up confirming that you have installed the Philips drivers. Click OK.
|
5. At the top of the window, click on the Options tab. Check the box next to Show Dictation Log after Send.
|
6. Click OK on the bottom of the screen. InSync will now connect to the server.
|
7. Look at the bottom right of your taskbar for an icon that looks like a recorder. Left click on the icon, and select Configure Philips 9450/9400i/9350.
|
8. On the Select User window, select the clinician that will be dictating on the recorder.
Click OK.
|
9. Select which folder(s) the clinician will dictate in.
Click OK.
|
10. Make sure that the Hold button on the left side of the recorder is disengaged.
Connect the recorder to the USB cable and click OK.
|
11. If the configuration is successful, you will see this screen. Disconnect the recorder from the USB cable and click OK.
|
|
You have successfully completed Step 3.
|
