Configuring Footpedal Purchased from Start/Stop with Emdat InScribe

Note: Footpedals purchased from Start/Stop come configured to work with Emdat InScribe. The only steps you must follow are 14-16 to get the Footpedal working with InScribe. Follow Steps 1-13 only if you need to re-configure your footpedal.

EMDAT Programming Guide

1. Switch the footpedal to program mode (under footpedal, flip switch until blinking light). 2. Place the foot switch on the floor.

To program the Play button to play on pressing down and stop playing on release:

3. Press and release the Play "pedal" on the footpedal. 4. On the main keyboard, press the "F2" key. 5. Press and HOLD the "Esc" key, press and release the left "Ctrl" key, release the "Esc" key. 6. On the main keyboard, press the "F9" key. 7. Press and release the Play "pedal" on the footpedal.

To program the Rewind pedal:

8. Press and release the Rewind "pedal" on the footpedal. 9. On the main keyboard, press the "F3" key. 10. Press and release the Rewind "pedal" on the footpedal.

To program the Fast Forward pedal:

11. Press and release the Fast Forward "pedal" on the footpedal. 12. On the main keyboard, press the "F4" key. 13. Press and release the Fast Forward "pedal" on the footpedal.

Now switch the footpedal out of programming mode until solid light is lit.

In InScribe Application:

14. After jobs have downloaded, click on Options Menu and select "Separate Play and Pause". 15. On Options Menu, select "Set Actions". 16. For the F9 key, you will see "Save". Drop down the list next to the F9 key and select "Pause". The actions are in alphabetical order so you should scroll up. Now select "Pause" and press OK or Close.

YOU ARE FINISHED!

7 Back To InScribe